Article Directory
Synergy Articles
Expert writers authoring real, helpful and unique content.
Subscribe To The Synergy Articles RSS Feed

There are a number of people who are unable to walk up and down the stairs inside of their home. They are either disabled and cannot physically walk on their feet or they are so weak that they cannot safely walk up and down the stairs. Either way they need something that is going to make this small feat possible. That is why they need the help of a DIY stair lift.

The do it yourself models are going to be the best models for anyone to get when you do not want to spend a whole lot of money. The unit is already going to cost a bit of money so you need to be able to save money that you would otherwise spend on hiring someone to come out and install it for you.

When the unit arrives you will need to lower the track onto the stairs and connect the brackets to the steps using the necessary screws that came with it. Make sure you lay it down next to the wall and not the stair well. Next you need to install the box wiring.

This cord needs to run through the track and up to the top of the stairs inside of the box. Make sure it is in a place where no one is going to be tripping all over it when it is installed. After that is finished you will be ready to lay down the upper track. This should slide right into place and than screw it to fasten it.

Put the track onto the Bruno stair lift. This is what will pull the chair in the direction that it will need to go in. Pull the power cable of the seat through the slot on the track and the chair will move easily. Next attach the seat to the track and secure it with the necessary screws. Plug in the main power source and you will be ready to go.

Comments are closed.